Reference build of AQ6 Hexa X – upgraded to FPV with Zoom Camera
Main frame parts
– FCP HL frame parts (with shells, clamps, 16mm carbon tubes)
– custom motor and esc G10/carbon plates
– FCP Dome
– custom 3D printed landing gears parts:
Electronic parts
– ESC32v2 x6 (with CAN)
– FC AutoQuad 6 + DIMU with Quatos
– Gimbal (3D printed) for zoom camera (27x zoom, 700tvl) with gimbal controller
– 700tvl fixed camera
– RC zoom controller
– 200mW 5,8GHz video transmitter
– BlueTooth module
Mechanical parts
– T-Motor MT2814-10 770kV motors
– T-Motor 12×4.5 carbon props
Some technical data
– AUW (with 2x5000mAh 4S Lipo, gimbal, zoom & fixed camera ) – 3,71kg
– Flight time – 15minutes to 3,5V per cell
– diagonal diameter – 730mm